Error code C-0116 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951
Code: C-0116
Classification: Main body: Power abnormality
Cause:
Abnormality 2 of the SD/CL_24V power for the printer control board (PRCB) tray.
When the error detection signal of the PRCB tray solenoid/clutch ICP blowout is detected but no 24V cut off is detected at the start.
Measures to take when alert occurs: The main body and the option stop immediately.
Estimated abnormal parts:
- Pre-registration clutch /1 (CL1)
- Vertical conveyance clutch (CL2)
- Pre-registration clutch /2 (CL3)
- Erase lamp (EL)
- Tray lock solenoid /1 (SD1)
- Tray lock solenoid /2 (SD2)
- Drum claw solenoid (SD10)
- Printer control board (PRCB)
Correction:
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition.
Note: "Please call service" is displayed on the touch panel.
Solution:
- Check the connector connection and the wiring related to DC24V between PRCB and clutch/solenoid/EL, and repair it if any abnormality.
- Check the drive and the coupling of the clutch and the solenoid, repair it if any abnormality, and then replace PRCB (Wiring diagram: Main body (1/4): 23-B)
- Replace PRCB
- Replace the clutch, solenoid, EL and PRCB at a time.