Error code C-0132 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-0132
 Classification: PF: Power abnormality
Cause: 
Abnormality of the power for the PF drive board (PFUDB) SD/CL of the 2nd tandem PF-703/706.
At the start, the error detection signal of the PFUDB solenoid/clutch IPC blowout is detected.                                                                                                                    
Measures to take when alert occurs:                                                               The main body and the option stop immediately.                                               
Estimated abnormal parts: 
  • PF drive board (PFUDB: PF-703/706)
Correction: 

Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition.

 Note: "Please call service" is displayed on the panel.   

Solution:                                                                                                               

  1. Check the connector connection and the wiring on PFUDB, and repair it if any abnormality.
  2. Check the drive and the coupling of the solenoid and the clutch connected to PFUDB, repair/replace it if any abnormality, and then replace PFUDB.
  3. Replace PFUDB
  4. If the same error cord occurs even after replacing PFUDB, replace the connected solenoid, the clutch and PFUDB at a time.
Back to blog