Error code C-0134 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-0134
 Classification: PF: Drive
Cause: 
2nd tandem PF-703 paper feed belt motor (M2) speed abnormality.
An error detection signal is detected twice in succession within a specified period of time after M2 was turned ON.                                                                                                                  
Measures to take when alert occurs:                                                               The main body and the option stop immediately.                                               
Estimated abnormal parts: 
  • Paper feed belt motor (M2: PF-703)
  • PF drive board (PFUDB: PF-703)
Correction: 

Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition.

 Note: The message "Please call service" is displayed on the panel.                                         

Solution:                                                                                                               

  1. Check the connector connection and the wiring between PFUDB and the motor, and repair it if any abnormality.
  2. Check the I/O drive and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: PF-703: 5-L)
  3. Replace M2
  4. Replace PFUDB
Back to blog