Error code C-0152 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-0152
 Classification: LU: Power source abnormality
Cause: 
Abnormality of the paper lift motor (M100) power in the LU drive board (LUDB).
An error detection signal (blowout of ICP) of M100 is detected.                                                                                                                             
Measures to take when alert occurs:                                                              
The main body and the option stop immediately.                                               
Estimated abnormal parts: 
  • Paper lift motor (M100)
  • LU drive board (LUDB)
Correction: 
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition                                                                                                  
 Note: "Please call service" is displayed on the touch panel.                                         

Solution:                                                                                                              

  1. Check the connector connection and the wiring between LUDB and the motor, and repair it if any abnormality.
  2. Check the I/O drive of the motor and the coupling of the gear, repair/replace it if any abnormality, and then replace M100 (Wiring diagram: LU: 5-C).
  3. Replace LUDB.
  4. Replace M100 and LUDB at a time.
Back to blog