Code: C-0160
Classification: PF: Drive
Cause:
3rd tandem PF-703 paper feed motor speed abnormality.
An error detection signal is detected twice in succession within a specified period of time after the M1 was activated.
Measures to take when alert occurs:
The main body and the option stop immediately.
Estimated abnormal parts:
- Paper feed motor (M1: PF-703)
- PF drive board (PFUDB: PF-703)
Correction:
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition
Note: "Please call service" is displayed on the touch panel.
Solution:
- Check the connector connection and the wiring between PFUDB and the motor, and repair it if any abnormality.
- Check the I/O drive of the motor and the coupling of the gear, repair or replace it if there is any abnormality. (Wiring diagram: PF-703: 6-L).
- Replace M1
- Replace PFUDB