Error code C-0204 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-0204
 Classification: Main body: Tray1
Cause: 
The locking of the tray lift-up motor /1 (M25) is detected.
An error detection signal of M25 is detected while M25 is ON.                                                                                                              
Measures to take when alert occurs:                                                              
The main body and the option stop immediately.                                               
Estimated abnormal parts:
  • Tray lift-up motor /1 (M25)
  • Printer control board (PRCB)
Correction: 
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition                                                                                                  
Note: "Please call service" is displayed on the touch panel.                                         
Solution:                                                                                                              
  1. Check the connector connection and the wiring between PRCB and motor, and repair it if any abnormality.
  2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: Main body (3/4): 16-A).
  3. Replace M25
  4. Replace PRCB
Previous Next
Back to blog