Error code C-0208 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-0208
 Classification: Main body: Tray2
Cause: 
The locking of the tray lift-up motor /2 (M34) is detected.
When M34 is ON, an error detection signal of the M34 is detected.                                                                                                         
Measures to take when alert occurs:                                                              
The main body and the option stop immediately.   
                                            
Estimated abnormal parts:
  • Tray lift-up motor /2 (M34)
  • Printer control board (PRCB)
Correction: 
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition                                                                                                  
Note: "Please call service" is displayed on the touch panel.                                         
Solution:                                                                                                         
  1. Check the connector connection and the wiring between PRCB and the motor, and repair it if any abnormality.
  2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: Main body (3/4): 21-A)
  3. Replace M34
  4. Replace PRCB
Back to blog