Code: C-0223
Classification: PF: Tray3
Cause:
The locking of the paper lift motor /1 of the 1st tandem PF:703/706 upper tray (M7: PF-703, M42: PF-706) is detected.
When M7 and M42 are ON, error detection signals of the M7 and M42 are detected.
Measures to take when alert occurs:
The main body and the option stop immediately.
Estimated abnormal parts:
- Paper lift motor /1 (M7: PF-703)
- Paper lift motor /1 (M42: PF-706)
- PF drive board (PFUDB: PF-703/706)
Correction:
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition.
Note: The message "Please call service" is displayed on the panel.
Solution:
- Check the connector connection and the wiring between PFUDB and motor, and repair it if any abnormality.
- Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: PF-703: 6-F, PF-706: 5-C).
- Replace M7: PF-703 or M42: PF-706
- Replace PFUDB