Error code C-0262 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-0262
 Classification: PF: Tray3
1st tandem PF-703 shutter motor /1 (M10) operation time abnormality 2.
The M10EM error detection signal is detected twice in succession within a specified period of time after M10 was turned ON. At this time, an error detection signal (blowout of fan ICP) is detected.                                                                                         
Measures to take when alert occurs:                                                              
The main body and the option stop immediately. 
Estimated abnormal parts:
  • Shutter motor /1 (M10: PF-703)
  • PF drive board (PFUDB: PF-703)
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition.                                                                                                  
Note: The message "Please call service" is displayed on the panel.                                         
  1. Check the connector connection and the wiring between PFUDB and the motor, and repair it if any abnormality.
  2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: PF: PF-703: 15-L).
  3. Replace M10 and PFUDB at a time.
Back to blog