Error code C-1170 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-1170
Classification: FS: FS-532 abnormality
Cause:
The exit paper press home sensor (PS37) does not turn ON within a specified period of time after the exit paper press motor (M26) turns ON.
   
Measures to take when alert occurs:
The main body and the option stop immediately.                                                 
Estimated abnormal parts:
  • FNS control board (FNSCB)
  • Exit paper press motor (M26)
  • Exit paper press home sensor (PS37)
Correction:
Turn OFF/ON the sub power switch of the main body.
Note: The message "Please call service" is displayed on the panel.
                      
Solution:
  1. Check the connector connection and the wiring between FNSCB and  motor/sensor, and repair it if any abnormality.
  2. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 3-F) 
  3. Check I/O and the operation of the sensor, and repair/replace it if any abnormality. (Wiring diagram: FS-532: 7-B) 
  4. Replace PS37.
  5. Replace M26.
  6. Replace FNSCB. 
Previous Next
Back to blog