Error code C-1413 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-1413
ClassificationSD: SD-513 abnormality
Cause:

When the front console open close sensor (PS47), the entrance section door sensor (PS62), the saddle stitching section door sensor (PS63)m the booklet tray door sensor (PS124), or the sub tray open close sensor (PS127) is inactive, 

 Measures to take when alert occurs:

         The main body and the option stop immediately.                                       
Estimated abnormal parts:
  • Front console open close sensor (PS47).
  • Entrance section door sensor (PS62)
  • Saddle stitching section door sensor (PS63)
  • Booklet tray door sensor (PS124)
  • Sub tray open close sensor (PS127)
  • SD drive board (PCB2)
  • SD control board (PCB1)
Correction: 
       Note: 
  • The message "Please call service" is displayed on the panel. 

Solution:

  1. Check the setting positions of the door and the scrap box, if there is any abnormality, clean or repair them,
  2. Check the connector connection and the wiring harness between PCB1 and the sensor. Then, repair them when there is any abnormality. (Wiring diagram: SD-513 (1/2): 11-B, 23-B, SD-513 (2/2): 9-O, 14-O, 18-O)
  3. Check the connector connection and the wiring harness between PCB2 and PCB1, and if there is any abnormality, repair them.
  4. Check I/O and the operation of the sensor, and if there is any abnormality, repair or replace them.
  5. Replace PS47, PS62, PS63, PS124 or PS127.
  6. Replace PCB2.
  7. Replace PCB1.
Back to blog