Code: C-1452
Classification: SD: SD-506 abnormality
Cause:
When the SD is unready a signal to start operation is received from the main body.
Measures to take when alert occurs:
The main body and the option stop immediately.
Estimated abnormal parts:
- Software bug
Note:
- The message "Please call service" is displayed on the panel.
Solution:
- Deactivate the power switch and unplug the power plug. Restart the main body after 10 seconds.
- Check the connector connection and the wiring of SDCB, and repair it when there is any abnormality.
- reinstalling SD firmware.
- Replace SDCB.