Error code C-0165 for Bizhub Press 1250 1250P 1052 Bizhub Pro 951

Code: C-0165
 Classification: PF: Drive
Cause: 
3rd tandem PF-703 paper feed belt motor (M2) speed abnormality.
An error detection signal is detected twice in succession within a specified period of time after the M2 was activated.                                                                                                                        
Measures to take when alert occurs:                                                              
The main body and the option stop immediately.                                               
Estimated abnormal parts:
  • Paper feed belt motor (M2: PF-703)
  • PF drive board (PFUDB: PF-703)
Correction: 
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition  
 
Note: "Please call service" is displayed on the touch panel.                                         

Solution:                                                                                                              

  1. Check the connector connection and the wiring between PFUDB and the motor, and repair it if any abnormality.
  2. Check the I/O drive of the motor and the coupling of the gear, and repair/ replace it if any abnormality. (Wiring diagram: PF-703: 5-L)
  3. Replace M2
  4. Replace PFUDB
Previous Next
Back to blog